ACS5000 Installation Manual
Page 12
© 2017 Brivo Systems LLC. All rights reserved.
Rev 1
For ACS5000-E Panels using the Brivo Cellular Network Router
NOTE:
Please refer to the Brivo CNR Configuration Guide on the Brivo website
(
http://www.brivo.com/wp-content/uploads/2015/01/S-Brivo-CNR-
Configuration-Guide.pdf
) for step-by-step instructions on the configuration of
the Brivo CNR with the ACS5000-E panel.
WARNING:
Cable Connectors
THE CONNECTORS ON THE INTERNAL ANTENNA CABLE ARE VERY FRAGILE.
Be very careful when plugging in the equipment.
WARNING:
Attach antenna before powering the Brivo CNR.
NEVER POWER UP A BRIVO CNR BEFORE CONNECTING THE ANTENNA.
WARNING:
FCC RF Exposure
NO ONE SHOULD BE WITHIN 20cm (8 inches) OF THE ANTENNA WHEN IT IS
TRANSMITTING, as per the FCC RF exposure requirements for mobile
transmitter end products using the Galtronics, O dBd antenna.
