10
11
TIMER
Press the TIMER button to set the auto-on and auto-off time
of the unit.
TIMER
To set the Auto-off time
Timer Operation
To set the Auto-on time
1. With the appliance "OFF", press the "TIMER" button once, a
blinking "TIME ON indicator" is shown on the LCD screen.
2. Press the MODE button to select mode of operation.
3. Press or to set the desired time period (the
available time range is in 1 / 2 hour increments from 0.5 to 10
hours & in 1 hour increments from 11 to 24 hours).
4. Press the "TIMER" button again to lock in the setting, both "TIMER"
and a "TIME ON indicator" are shown on the LCD screen. The timer
will count down the time remaining in half hour in increments.
When the countdown is complete the appliance will turn on.
1. With the appliance "ON", press the "TIMER" button once, a
blinking "TIME OFF indicator" is shown on the LCD screen.
2. Press or to set the desired time period (the available
time range is in 1 / 2 hour increments from 0.5 to 24 hours).
3. Press the "TIMER" button again to lock in the setting, both
"TIMER" and a "TIMER ON indicator" are shown on the LCD screen.
The timer will count down the time remaining in half hour in
increments. When the countdown is complete the appliance will
turn off.
NOTE
:
CANCELLING ON / OFF TIMERS
When a timer is set, pressing the "TIMER" button will cancel any
timer settings and the TIMER OFF or TIMER ON indicator will no
longer be shown on the LCD screen.
TURBO
This mode allows you to cool indoor air quickly in summer or
warm it quickly in winter.
1. Press the "ON / OFF" button to turn on appliance.
2. Confirm that either COOLING or HEATING modes are selected.
3. Press the "TURBO" button, the appliance will run in "TURBO"
mode.
In COOLING mode, the unit is set to 16 , auto fan speed and
continuous circulation of vertical & horizontal flow.
In HEATING mode, the unis set to 31 , auto fan speed and
continuous circulation of vertical & horizontal flow.
NOTE:
When the appliance is operating in AUTO mode the TURBO
function is not available.
In TURBO mode the fan is set to operate at the maximum
output. Attempting to alter the fan speed during TURBO
mode operation will cancel TURBO and return the appliance
to normal operation.
Deactivate TURBO function when the room temperature
reaches a satisfactory level.
ECO
In this mode the appliance automatically sets the operation to
achieve energy savings.
In COOLING mode, the temperature setting will increase 2
above the set temperature.
In HEATING mode, the temperature setting will decrease 2
below the set temperature.
1. Press the "ON / OFF" button to turn on appliance and select
a COOLING / HEATING mode.
2. Press the "ECO" button, the appliance will run in ECO mode.
3. Pressing the "ECO" button again will cancel the mode, "ECO"
will no longer be shown on the LCD screen.
NOTE:
The ECO function is available in COOLING and HEATING modes.
NOTE:
When setting a timer function, at each step failure to press buttons
within 10 seconds will terminate the timer setup.
If this happens you will need to re-start the timer setup procedure
at step 1.
