281 Issue 1 - Service Manual - BX3
34
7.6 Main Fan Assembly Removal
15,20 & 26Kw units
1. Turn the unit OFF and isolate the power supply.
2. Remove the 7 screws holding the top plate on the fan compartment
3. Remove the screw that holds the wiring loom onto the top of the fan compartment.
4. Remove the wiring loom from the fan speed connector block.
5. Remove the fan top plate away from the fan compartment and ensure that the wiring
looms are not restricting the removal of the plate until you expose the fan motor assembly.
6. Slide the fan motor upwards and away from the fan compartment.
7. Remove fan motor plate from the fan scroll. (See below for Motor and play removal).
Installation is a reversal of the removal procedure.
Removal of the fan assembly.
Unscrew the
screws holding
the top plate
down and then
remove carry
handle.
Remove the screw
that holds the
wiring loom onto
the top of the fan
compartment and
the wiring loom
from the fan speed
connector block.
Once the fan
motor is exposed
then slide the fan
motor upwards
and away from
the fan
compartment
