Britton Polar Bear, Инструкция по эксплуатации

Страница: 6 / 31

BATTERY INSTALLATION
Open the battery compartment cover on the vibration/music unit using a small Phillips-head
screwdriver. Insert 2 x 1.5v “C” alkaline batteries as indicated inside the battery compartment.
Close compartment door and replace the screw.
1. The vibration/music unit can then be slotted into the foot rest frame.
BASE ASSEMBLY
2. Place the left and right base frames and base connector on a flat surface.
3. Slide the base connector into the left base frame.
Push gently on the flip until you hear a ‘click’.
Repeat step 2 with the right base frame.
BACKREST
4a. Slide left and right sides into each other ensuring that the silver locking button is securely
locked into place.
4b. Slide connected back frame onto the left and right base frame and press securely into
place. Silver locking buttons on the base frame must be pop up thru the holes in backrest
frame.
SEATPAD
5a. Slide the seat pad over the back frame and over the footrest frame.
5b. The vibration/music unit should be visible through the seat pad opening.
Please be noted that footrest frame is not attached to base frame yet.
FOOTREST
6. Push footrest tube into the reclining mechanism until you hear ‘click’.
Repeat with other side.
SEAT HARNESS
Place your baby in the bouncer with crotch strap positioned between his/her legs.
7. Fasten the buckles on the both sides of waist belts pushing both buckle tongues into the
buckle housing until you hear a ‘click’.
WARNING: Always use the crotch strap in combination with the waiste belt.
TOY BAR
8. Slide the clips of the toy bar over the bouncer’s upper frame just above the harness.
RECLINING THE BACKREST
9. Press buttons on both sides at same time, push the backrest up or down for suitable height.
Release the buttons when you have got the suitable height.
There are 3 reclining positions.
VIBRATION/MUSIC UNIT
10. Left button with notes on it activates the music. There are 3 different volume levels and you
can choose from s 9 different calming melodies.
Vibration function activates by pushing right button with wave. You can choose 3 different
vibration levels.