4. Plug it in
4 easy steps to install
1. Attach the sensor
3.
Assemble the power supply
2. Activate the transmitter
battery tab
flashing
red light
Identify the live mains cable going into
your electricity meter (it will be brown, red
or have ‘L’ on it).
Clip the sensor around the mains live
cable. You should hear a click to indicate
the sensor has been tightly closed.
Plug in the other end of the sensor cable
underneath the transmitter.
Open the transmitter by pressing the
button on the back and pulling the outer
cover away. Remove the battery tab. The
red light will flash to show the unit is
working.
Put the plug into a mains socket and
insert the black power cable into your
monitor. The monitor will light up and ask
you to enter the correct year, month, day
and time. Use the and buttons to
change values and the
O
button to save.
Now you are ready to start using your
monitor. You may want to set the monitor
for your particular tariff and budget,
please see the frequently asked questions
for help with this.
Insert and twist clockwise to clip the pins
to the power supply. You will hear a small
click when the two lock correctly.
