//
2.0 INSTALLATION REQUIREMENTS
//
3.0 APPLIANCE DATA FOR THE ASHURST ELECTRIC LED STOVE
The appliance is supplied with a pre-wired three pin BS1363 plug (13 Amp fuse rated)
and 1.6 metres of electrical flex. It is therefore necessary for a suitable electrical socket
to be located within this distance of the appliance and be easily accessible. The stove
may be installed on a combustible or non-combustible floor, however the heater outlet
is underneath the stove and certain types of floor covering may be affected by the heat
produced by the stove. The ability of the floor covering to withstand the heat produced
by the stove should be ascertained before proceeding with the installation of the stove. If
in doubt then the stove should be mounted on a non-combustible hearth or plinth which
extends for at least 150mm in front of the stove. This appliance should be positioned on
a firm level surface. If the stove is to be sited in a fire surround then the suitability of
the surround for use with electrical heaters should be established with the fire surround
manufacturer. If fitted into an open draught fireplace, it is advisable to block off the chimney
to reduce the risk of draught through the stove which may cause the safety cut out system
in the fan heater to operate.
Weight (kg)
30kg
Dimensions
H 951 x W 420 x D 420mm
Supply Voltage and Rating Power
220–240V AC, 50Hz 1700–2000W
Fuse Rating
13 Amp
Heating Elements
2000 W
Lighting
LED
Location
Indoor use only
Supply plug/cord
BS1363 /1.7 metres long
Item
Symbol Value Unit
Item
Unit
Item
Unit
Heat Output
Types of heat input, for electric storage local space
heaters only
Other control options
Nominal heat output
Pnom
2.0
KW
Manual heat charge control with integrated thermostat N/A
R o o m t e m p e r a t u r e
control with presence
detection
No
Minimum heat output
(indicative)
Pmin
1.0
KW
Manual heat charge control with room and/or outdoor
temperature feedback
N/A
Room temperature
control with open
window detection
Yes
Maximum continuous
heat output
Pmax, c
2.0
KW
Electronic heat charge control with room and/or outdoor
temperature feedback
N/A
With distance control
option
No
Fan assisted heat output
N/A
With adaptive star t
control
No
W i t h w o r k i ng t i m e
limitation
No
Auxiliary electricity consumption
Type of heat output/room temperature control
With black bulb sensor
No
At nominal heat output
elmax
0.0
KW
Single stage heat output and no room temperature
control
No
At minimumheat output
elmin
0.0
KW
Two or more manual stages no temperature control
No
In standby mode
elSB
0.45 KW
With mechanical thermostat room temperature control
No
With electronic room temperature control
No
Electronic room temperature control plus day timer
No
Electronic room temperature control plus week timer
Yes
//
03
//
04
© 2019 British Fires
