Briteq Pro Beamer RGBW outdoor, Инструкции по эксплуатации

Страница: 5 / 16

3
2.1 MOUNTING
HANGING
UPRIGHT
The fixture can be mounted in an upright
or sitting position using the supporting
brackets.
The fixture can be mounted in a hanging
position using the supporting bracket.
The bracket should be secured to the
mounting truss or structure using a
standard mounting clamp. Please note
that when hanging the unit a safety cable
should also be used.
@ 220V: 15 units may be connected in series
@120V: 7 units may be connected in series
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2 POWER CONNECTIONS
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or
beween two fixtures, then a DMX signal amplifier is needed as well.
2 INSTALLATION