ENGLISH
USER MANUAL
BRITEQ
®
6/17
BT-ORBIT
Blackout Mode
Determines how the projector should behave when the DMX-signal is lost.
•
Blackout mode:
when no DMX-signal is detected, the unit goes in blackout and waits for the DMX-signal.
•
Freeze mode:
when no DMX-signal is detected, the unit freezes with the latest dmx values received and
waits for the DMX-signal.
•
Select “
Blackout Mode
” and press ENTER
•
Use
▼ / ▲ buttons to select Freeze or Blackout.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
Display Settings
This submenu contains all display related settings.
•
Press the MENU button and select the
“Display Settings”
submenu.
Display Inverse
The projector can be fixed/used in upward position or hung in upside-down position. To make reading of the
display easier, you can turn it over 180°.
No: Display readable while the projector is in upward position.
Yes: Display readable while the projector is in upside-down position.
•
Select “
Display Inverse
” and press ENTER
•
Use
▼ / ▲ buttons to select Yes or No.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
Notice
an alternative shortcut for this function: press the
▲
&
▼
buttons together for 1,5sec.
Backlight Auto Off
No: display is always lit.
Yes: display turns dark when not used for some time.
•
Select “
Backlight Auto Off
” and press ENTER.
•
Use
▼ / ▲ buttons to select Yes or No.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
Backlight Intensity
Used to set the intensity of the display backlight.
•
Select “
Backlight Intensity
” and press ENTER.
•
Use
▼ / ▲ buttons to change the intensity between 1 and 10.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
Temperature Unit
The display can show temperature either in °C (Celcius) or °F (Fahrenheit)
°C: Temperature is shown in Celcius.
°F: Temperature is shown in Fahrenheit.
•
Select “
Temperature Unit
” and press ENTER.
•
Use
▼ / ▲ buttons to select °C or °F.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
Display Warning
You can choose if the projector warns you that an error occurred.
No: display only shows the error discretely
Yes: the display starts blinking while the error is shown on the display.
•
Select “
Display Warning
” and press ENTER.
•
Use
▼ / ▲ buttons to select Yes or No.
•
Press the ENTER button to save.
To return without any change or go to a previous menu, press the MENU button.
