ENGLISH
OPERATION MANUAL
BRITEQ
®
9/66
BT-NODE28
USER PRESETS:
here you can make and save your personal presets. After saving you can use / edit
these presets at any time in the future.
To create, manage and apply your personel presets, use
▲/▼ to select [User Presets] and press
[ENTER] to confirm. In this section you have a list of 8 personal presets.
You can:
EDIT
an existing user preset
LOAD
an existing user preset
SAVE
the current settings to a user setting.
For each of your user preset you can:
Rename:
set the name of your preset in the user preset list
Device Name:
set the Device Name
IP Address:
set the IP Address
Netmask:
set the Netmask
Device ID:
set the device ID
DMX Port:
set the DMX-Port configuration (see [SET DMX PORT] for setails)
9. VERSION
Shows the firmware version of your BT-NODE28
MERGER MODE
To use the BT-NODE28 as a dmx merger we need two different sources. The signal can come from a DMX
input, an ArtNet input or both. You must configure an output to merge the signal of the two sources. The
output merging option can be LTP (
L
ast
T
akes
P
recedence) or HTP (
H
ighest
T
akes
P
recedence).
Input:
Internal: set 2 ports as input mode, each with a different 1
st
universe
Port configuration
Port status
INPUT
Port mode
Single
Frame rate
040
Main Universe
1
st
: choose an unique universe number (0 to 255)
for each splitter in the node.
2
nd
: no need to configure
Resend
disable
Display mode
Dec
External: 2 different Artnet universes need to be received by the device to perfom the merging.
Output:
Set the selected port as “OUTPUT”
Port configuration
Port status
OUTPUT
Port mode
HTP / LTP
Frame rate
040
Main Universe
1
st
: select the universe of one of the inputs
(local or ArtNet)
2
nd
: select the universe of the other input
(local or ArtNet)
Resend
disable
Display mode
Dec
