ENGLISH
USER MANUAL
BRITEQ
®
11/59
BT-LASER1500 RGB
6) OTHER SETTINGS:
Press the
FUNC-button (the display starts blinking) until the display shows SETTING
Press the UP / DOWN buttons to browse the special setting options
Press the ENTER-button to confirm the setting option you want to adapt:
MIRROR:
press the UP / DOWN buttons to set the desired image inverting mode. This can be
useful for example for projections behind a transparent screen
COLOUR:
press the UP / DOWN buttons to set the desired colour option: SINGLE COLOUR,
DUAL COLOUR or MULTICOLOUR
MUSIC:
press the UP / DOWN buttons to set the desired microphone sensitivity.
Press the ENTER-button to confirm your choice. (the display stops blinking and the selected mode is
activated)
MAINTENANCE
Make sure the area below the installation place is free from unwanted persons during servicing.
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
In order to protect the device from overheat the cooling fans and ventilation openings should be cleaned
monthly.
The interior of the device should be cleaned annually by experienced service people.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel only!
SPECIFICATIONS
Mains Input:
AC 100~240V, 50/60Hz
Fuse:
250V 1.6A slow blow (20mm glass)
Total Power consumption:
45W
Sound Control:
Internal microphone
DMX connections:
3pin XLR male / female
DMX channels:
1 or 13 channels
DMX starting address:
001
500 or 511
Laser Power:
200mW Green CW laser (
λ = 532nm)
500mW Red CW laser (
λ = 638nm)
800mW Blue CW laser (
λ = 450nm)
Laser scanners:
high speed 20kHz type
Laser radiation class:
Class 4
Laser Safety Standard:
EN 60825-1:2007 for Laser Safety
Size (WxHxD):
30cm x 24cm x 16cm
Weight:
7.86kg
Every information is subject to change without prior notice.
You can download the latest version of this user manual on our website:
