ENGLISH
INSTALLATION MANUAL V1.0
BRITEQ
®
2/2 BT-THEATRE YOKE ADAPTER-HD1
PREPARE SOME OF THE PARTS
1.
Take the aluminum cylinder named “I” and insert 2 of the M4 screws “D” → see picture
2.
Cylinders “A” and “B” are identical: take one of them and make the central hole bigger using
a metal drill Ø 10mm.
From now on we call this cylinder “B”
REMOVE THE ORIGINAL BRACKET
3.
Unscrew and remove the L-handle on the left side of the projector: not needed anymore!
4.
Unscrew and remove the M10 Hex bolt on the right side of the projector: not needed anymore, except for
the biggest washer.
5.
Remove the complete bracket: not needed anymore.
6.
Keep the 2 big, thin copper colored washers: both are still needed.
INSTALL THE NEW CYLINDERS
7.
Fix the cylinder
“I” firmly using parts “F” and “G” on the
left
side
where you removed the L-handle
8.
Now fix cylinder “A” on top of cylinder “I”, using four “D”
screws.
9.
Put the 2 copper washers on the
right side
of the projector and
squeeze the 2 copper washers with cylinder
“B” (with 10mm hole).
10.
Fix the Yoke on
cylinder “B” using the M10 bolt “H” and a big black
washer from the original bracket.
11.
Turn the projector so the
left side
is facing you.
12.
Open the Yoke a little so it can be put over the cylinder
“A”
13.
Fix the Yoke firmly using the long M10 bolt
named “C” + spring washer “E”
14.
Done
All information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.briteq-lighting.com
Copyright © 2019 by BEGLEC NV -
‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
