Instructions for Installation & Use
58
FORW
ARD F
ACING
INSTALLING INTO VEHICLE FORWARD FACING
(UPRIGHT OR RECLINED)
Stabilising
bar
Hook and Loop
attachment
PREPARING FOR INSTALLING INTO VEHICLE - REARWARD FACING
Fully press Adjuster Button (A) while
pulling Upper Anchorage Strap (B)
to lengthen.
B
A
The restraint is normally packaged in the fully upright forward
facing mode so if you need to use it rearward facing you must
first fully recline the restraint, and then convert the restraint to
rearward facing mode as shown below.
If upper anchorage strap is folded up for storage undo storage
strap then lengthen. Fully press adjuster button (A) while pulling
upper anchorage strap (B) to lengthen.
A. Remove the seat from the vehicle by
disengaging the seatbelt or ISOFLEX straps
and upper anchorage strap as described on
pages 50 to 52.
B. Remove the padded insert (if fitted) as this
is no longer required.
C. To store the stabilising bar, lift the cover at
the end of the seat to uncover the storage
recess.
HOW TO SETUP
