manualshive.com logo in svg

Britax safe-n-sound BS0072E-020133, Инструкции по установке и использованию

Поделиться
Скачать
Britax safe-n-sound BS0072E-020133 Скачать руководство пользователя страница 47

47

Instructions for Installation & Use

 

Slackened Top Tether

HOW TO USE

The padded insert is designed to provide extra support and comfort and may be used for smaller children. 
Discontinue use when Padded insert is a tight fit, creates discomfort for larger children, or the child's 
shoulder reach the lower shoulder height marker.

         IMPORTANT :

Make sure that nothing is obstructing harness straps and that child’s arms and legs are free with the 
straps in the correct location - see previous page.
Do not use the restraint if straps do not tighten and contact BRITAX Childcare Customer Service. 
Refer to back cover for contact details.

 CAUTION:  ALWAYS REMOVE SLACK

                  

 

             

               

A LOOSE HARNESS IS DANGEROUS.

WARNING: DO NOT LEAVE CHILDREN UNATTENDED 
IN THE CAR.

Adjuster 
for the Top 
Tether

Adjustable
Headrest

Pull Harness 
adjuster strap to 
tighten the harness

Harness 
shoulder straps

Harness Adjuster 
Strap

Remove

slack

Содержание safe-n-sound BS0072E-020133





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды