Instructions for Installation & Use
57
TRAVEL SYSTEM
INTEGRAL LATCH
Arm Bar cover removed
INSTALLATION INSTRUCTIONS PREPARING THE BABY
CAPSULE - LATCH METHOD
You may need to remove the Britax CLICK & GO™ Adaptors (see page 62 to 62) to
enable fitment on some strollers when using the integral latch system.
A. Remove baby from Baby Capsule.
B. Rotate handle into "carry position", then lift the release catch with the other hand.
C. With the release catch depressed lift the Baby Capsule clear of the base hooks, and
remove from the car.
PREPARING THE STROLLER
A. Ensure the Stroller has been assembled correctly.
B. Open the Stroller, apply the brakes.
C. Before fitting the Baby Capsule check and ensure all latches are engaged to prevent
the stroller folding inadvertantly.
D. Lower the backrest to the fully reclined position.
E. Remove the arm bar cover and store in the basket pocket.
* Refer to page 19 for handle position
