Instructions for Installation & Use
37
HOW TO USE
REMOVING BABY & BABY CAPSULE FROM BASE
A. Loosen the top tether strap. Ensure that the adjuster and/or harness straps do not
fall on the baby.
B. Remove the top tether strap from the tether strap guides on the Baby Capsule.
C. Place top tether strap between the stabilising bar and the car seat back so that it will
not fall behind the seat or get trapped in the door.
This will keep the top tether strap visible and ready
for use when the Baby Capsule is put back in the car.
D. Rotate the Carry Handle to the “carry position” as
shown. Ensure the handle is locked.
E. Grasp the handle with one hand then pull the Baby
Capsule release catch with the other hand. With the
catch lifted raise the Baby Capsule clear of the base.
Always ensure the handle is locked in position
before lifting.
F. When the Baby Capsule is clear of the base, carefully
remove it from the car.
Ensure the harness adjustment strap hook is connected
to the loop.
The end of the harness adjustment strap is
connected to the cover to avoid tripping over
the end when carrying the Capsule. Ensure
the harness adjustment strap hook is attached
when carrying the Capsule.
CAUTION:
Hook the harness adjuster strap
on to the loop to prevent tripping
over the strap.
Pull
Catch
Lift
