26
27
IMPORTANT:
The Versa-Tether
®
carry clip is only for
use when you wish to carry the child seat between
locations.
Do not install the child seat with the Versa-
Tether attached to the carry clip.
Secure the excess
Versa-Tether webbing in the elastic strap during use.
Store the Versa-Tether in the storage pouch when not in
use. Always ensure any excess webbing is contained
within your vehicle.
To attach the Versa-Tether to the carry clip or tether anchor:
The Versa-Tether can indicate when the child seat has been in a
moderate or severe
crash (see page 4) and replacement of the
child seat is necessary.
Figure 1 shows a tether acceptable
for continued use
(provided the
child seat has not been involved
in a crash).
The colored stitching
will be intact but not visible from
the back of the seat.
Figures 2 and 3 show examples
of when the tether has been
damaged and is unacceptable for
continued use. If one or both of
the loops have pulled through the
back of the shell and/or any of the
colored stitching has ripped, the
child seat is no longer acceptable
for use.
IMPORTANT:
Discontinue use of
child seat if it has been involved
in a moderate or severe crash,
regardless of whether the loops
have pulled through the back
side of the shell and the colored
stitching has been ripped.
1
Firmly press the hook over
the carry clip or tether
anchor point.
2
Pull the loose end of the
webbing to remove slack from
the Versa-Tether.
NOTE:
When using as a carry strap, tighten until the strap is comfortable to carry.
To remove the Versa-Tether from the carry clip:
1
Loosen the Versa-Tether.
a Tilt the lock up
b Pull the tether webbing
2
Remove the Versa-Tether
®
hook from the carry clip.
Child Seat Functions
Child Seat Functions
1
2
3
b
a
