Britax GROW WITH YOU CLICKTIGHT, Руководство пользователя

Страница: 14 / 96

12
Britax Child Safety, Inc.
Table of Contents
1. Release the buckle and
open the CLICKTIGHT
to access the lower
connectors.
a.
Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Route the lower connector
strap along the green belt
path.
3. Firmly attach the lower
connector onto their
adjacent lower anchors.
For push-on lower
connector only: A click
helps confirm attachment.
NOTE: Verify that the
strap is not twisted.
4. Pull the end of the lower
connector strap to remove
slack.
IMPORTANT: Overtightening
the webbing may prevent
the CLICKTIGHT from properly
securing.
LATCH with CLICKTIGHT
Before you begin:
• Check that your vehicle has lower anchors.
Use the vehicle belt (not lower connectors) for harness mode
installations with children who weigh more than 40 lbs (18.1
kg).
• Check that your vehicle has a top tether anchor.
Britax recommends that the top tether be used at all times
when installing the child seat. Using the top tether will improve
the stability of your child seat and reduce the risk of injury.
Check your vehicle owner’s manual for tether anchor locations.
• Loosen the tether and place it over the child seat back to keep
it from becoming pinned between the child seat and vehicle
seat during installation.
• Adjust the child seat to desired position and place forward
facing on the vehicle seat.
Lower Connector
Hook
Lower Connector
Push-on
(Select Models)