Britax FRONTIER CT, Руководство пользователя

Страница: 9 / 51

14 15
LUAS with CLICKTIGHT
1
Release the buckle and open
the CLICKTIGHT to access
the lower connectors.
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
2
Route the lower connector
strap along the green belt path
and firmly press the lower
connectors onto their adjacent
lower anchors.
* A click confirms attachment.
* Verify that the strap is not
twisted.
3
Pull the end of the lower
connector strap to remove
slack.
Before you begin:
IMPORTANT: Positioning this child restraint with LUAS in booster
mode can ensure proper belt placement every time the seat is
used, however it is not required. To use this seat in booster mode
without LUAS, see instructions for
Securing Your Child on page 18.
IMPORTANT: Use lower connectors and tether only to position
this child seat in your vehicle seat. Secure your child using the
vehicle’s lap-shoulder belt system.
• Check that your vehicle has lower anchors.
• Check that your vehicle has a top tether anchor.
• Loosen the Versa-Tether and place it over the child seat
back to keep it from becoming pinned between the child
seat and vehicle seat during positioning.
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat.
OR
OR
5
Firmly press the Versa-Tether
hook over a designated
vehicle tether anchor. Remove
slack.
6
Secure excess webbing with
the elastic strap.
4
Close the CLICKTIGHT.
* A click confirms the
CLICKTIGHT is secure.
Positioning the Child Seat: Booster Mode Positioning the Child Seat: Booster Mode