04
05
5. TO ADJUST THE BUMPER BAR
8. TO REVERSE THE HANDLE
A
Lift the finger grips on each side of the handle to
release it for forward or reverse positioning.
Ensure that both sides are fully locked before using
the stroller.
9. TO ADJUST THE CANOPY
A
Adjust the canopy studs to the attachments on the
seat back. Open the canopy by pulling the canopy
forward or close it by pushing the canopy back.
10. TO ADJUST THE LEG SUPPORT
A
Lower the leg support by pressing the release
latches located on both sides of the leg support.
Then push the leg support down to the desired
position.
B
Raise the leg support by lifting it up until latches
lock into the desired position.
A
Fully depress the side armrest buttons and slide
the bumper bar out for easy access into stroller,
or in to install it.
NOTE: It is recommended that the bumper bar be used
at all times.
6. TO USE THE SWIVEL WHEELS
A
There are four sets of swivel wheels on this
product, however only use 2 sets in the unlocked
swivel position. The wheels closest to your feet /
handle should always be in the locked position
with the brake lever facing you.
B
To lock the swivel wheels lift the locking clip up,
to unlock push down.
NOTE: Lock all swivel wheels whenever on uneven
surfaces.
7. TO USE THE BRAKE (Front and Rear)
A
Push each brake lever down to lock the brakes.
B
Lift each brake lever up to release the brakes.
NOTE: Always apply the front and rear brakes
whenever you park the stroller.
A
B
A
B
www.britax.com.au
www.britax.com.au
