02/15
Model 2500.CT
Page 7 of 11
Operation
Dispensing Cold Water
To dispense cold water, press the
“Cold” button; the ring around the
“Water” button should turn blue.
Press and hold the “Water” button to
dispense; release the button to stop
dispensing.
Dispensing Hot Water
To dispense hot water, press the “Hot” button; the ring around the “Water” button should turn
red. Press and hold the “Water” button to dispense; release the button to stop dispensing.
CAUTION:
Water dispensing from the hot tank is sufficiently hot to cause injury. Take care
when dispensing hot water.
Maintenance
Filter Changes
NOTE:
Filter life is 1500 gallons
or 12 months, whichever comes
first. With higher usage, filter
life may need to be replaced
sooner. See your water dealer
for more information.
STEP 1:
Remove the top lid of the cooler.
Unscrew the 3 Phillips screws
that hold down the internal lid
and lift it out of place. This will
expose the filter area.
STEP 2:
Pull the filter out enough to unscrew the cartridge from the head. When the cartridge is free,
move the head aside, pull the cartridge out and lower a new one in its place, screwing it firmly
into the head. Lower the filter back into its place.
STEP 3:
The new filter cartridge must be purged before it is used. Shut off the inlet water supply and
see STEP 8 under the Installation section for instructions on how to safely do this.
STEP 4:
Turn on the inlet water supply. Dispense water; check for leaks. Replace the covers removed
in STEP 1.
STEP 5:
Note the date of filter change on the filter replacement sticker on the back of the unit.
Annual Float Check
