Bristan WavePlus Dual Outlet Touchpad, Инструкция по установке и руководство пользователя

Страница: 8 / 16

8
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Installation - Mixer Unit
Hot
Cold
Out
Mounting
Insert the filters & Insert the filters &
connect the water connect the water
supplies. supplies.
Connect Connect
outlet outlet
feed. feed.
Plug power Plug power
supply cable into supply cable into
power socket & power socket &
mixer unit. Plug mixer unit. Plug
in the interface in the interface
unit cable. unit cable.
Find a suitable place for the mixer Find a suitable place for the mixer
unit. It must be no further than 1.2m unit. It must be no further than 1.2m
away from a socket & no away from a socket & no
further than 3m from where the further than 3m from where the
interface unit will be installed. interface unit will be installed.
Mark hole & drill, fix the mixer unit to Mark hole & drill, fix the mixer unit to
surface using suitable screws surface using suitable screws
(not supplied). (not supplied).
Slide spade Slide spade
connectors onto connectors onto
each solenoid. each solenoid.
The connectors The connectors
come in the come in the
following pairings: following pairings:
Grey & Blue Grey & Blue
Purple & Brown Purple & Brown
4 3
2
1
5
6
REMEMBER
To flush the
pipe work
before
connecting
Connect the Connect the
outlet feed to outlet feed to
a T-piece (not a T-piece (not
supplied) & run supplied) & run
the pipe work to the pipe work to
elbows. elbows.
Connect solenoid Connect solenoid
valves. valves.
REMEMBER
To chase the
cables down
the wall to
interface unit.
REMEMBER
Mixer unit mus
t
be installed
flat on floor or
on a wall with
outlets facing
down
IMPOR
TANT
Rear ac
cess
will be r
equired
for futur
e
servic
e and
maint
enanc
e.
IMPOR
TANT
Fit isola
tion
valves f
or
future servic
e
and
maint
enanc
e.
IMPOR
TANT
Make sur
e to
fit the spade
connect
ors
in the c
orrect
pairings.