• Remove all packaging and check
the contents for damage before
starting any installation.
• Fitting isolation valves to the
inlet feeds is required as close as is
practical to the inlet connections for
ease of maintenance.
• Always switch off the power at
the consumer unit and isolate the
electrical supply before making any
electrical connections or if you have
to remove the cover of the Control
Panel.
• This product must not be modified
in any way as this will invalidate the
guarantee.
3
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Important Safety Information
• Please read these instructions
thoroughly and retain for future use.
• All products manufactured and
supplied by Bristan are safe provided
they are installed, used correctly
and receive regular maintenance in
accordance with these instructions.
•
If you are in any doubt about your
ability to install this product safely
you must employ the services of
an experienced qualified plumber/
electrically qualified person.
• This Digital Electronic Mixer
Shower needs to be installed in
accordance with, and meet the
requirements of the Water Supply
(Water Fittings) Regulations 1999 and
Scottish Byelaws 2004.
Before starting any installation
please consider the following:
• Before drilling into walls, check
that there are no hidden electrical
wires, cables or water supply pipes.
This can be checked with the aid of an
electronic detector.
• Do not install this shower unit in a
room/environment without adequate
ventilation or an extractor fitted. This
is required to prevent condensation
forming within the unit.
• Do not operate the shower unit if
the shower head or spray hose has
been damaged or is blocked.
• Do not block the flow of water
from the shower head, by placing it
(smothering it) on your hand or any
other part of your body or foreign
object.
Warning:
Before installing the
new Digital Electronic Mixer
Shower it is essential that you
thoroughly flush through the
pipe work in order to remove any
remaining swarf, solder, etc.
Failure to carry out this
procedure could cause problems
or damage to the workings of
the Mixing Valve.
• Do not operate the shower if
the water stops flowing during
use or if the water is leaking from
the Mixing Valve itself. Turn off at
the mains electrical supply and refer
to the Troubleshooting section or
contact Bristan Customer Services on
0330 026 6273.
Warning:
Do not operate this
product if you suspect it is
frozen. Do not site the Mixing
Valve where it might be
subjected to freezing conditions.
