• Please read these instructions
thoroughly and retain for future use.
• All products manufactured and
supplied by Bristan are safe provided
they are installed, used correctly
and receive regular maintenance in
accordance with these instructions.
•
If you are in any doubt about your
ability to install this product safely
you must employ the services of
an experienced qualified plumber/
electrically qualified person.
•
These fittings need to be installed
in accordance with, and meet the
requirements of the Water Supply
(Water Fittings) Regulations 1999 and
current bylaws. For full Installation
Requirements & Notes (IRN) please
visit
wras.co.uk/directory
.
• Remove all packaging and check
the components for damage before
starting installation
•
Before starting any
installation, please consider
the following:
• Prior to drilling into walls, check
that there are no hidden electrical
wires, cables or water supply pipes.
This can be checked with the aid of an
electronic detector.
• If power tools are used, don’t
forget to wear eye protection and
unplug equipment after use.
3
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
• Before installing these taps the
water supply must be thoroughly
flushed in order to remove any swarf,
solder etc.
• We recommend isolation valves to
be fitted to the inlet water supplies to
ensure ease of future maintenance.
• Full access must be made available
for future maintenance/servicing
purposes.
• This product must not be modified
in any way as this will invalidate the
guarantee
If in doubt, contact a registered plumber
or your Local Water Authority or the
Secretary of the Institute of Plumbing,
address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
Important Safety Information