Installation - Bath Shower Mixer
Installation - Bath Filler
1.
Identify all components prior
to installation
1.
Install the fittings onto the bath
using the provided washers (6),
above and below the bath and
back nuts (7), below the bath.
2.
Connect the hot and cold
water supplies.
3.
Fully open both valves, letting
the water to flow for a few
minutes and check all joints and
connections for leaks.
1.
Identify all components prior
to installation
2.
Install the fittings onto the bath
using the provided washers (6), above
and below the bath and back nuts (7),
below the bath.
3.
Connect the hot and cold water supplies.
4.
Fit the hose to the mixer (11) and the
handset using the small sealing washers.
5.
To fit wall bracket, position, mark
out and drill holes to suit, then
screw wall bracket to the wall,
ensuring that the handset will reach
it.
6.
Fully open both valves, letting the water to flow for a few minutes and check all
joints and connections for leaks.
7.
Operate the mixer in both bath and shower mode. To switch from bath to
shower mode pull the diverter knob (8) up. After use the mixer automatically
reverts to the bath filling mode.
12
Содержание QD 1/2 C
Страница 15: ...15...