10
Installation Cont.
1.
With the backnut, metal and rubber
washer fitted to the side body threaded
tail, feed the side body through the hole in
the bath from underneath and secure in
position by screwing the plinth onto the
side body valves, ensuring that the
washers are fitted between the plinths
and the bath to create a water tight seal.
2.
Secure the side bodies to the bath by
tightening the backnuts and the washers
up to the underneath of the bath.
3.
Screw the valve shrouds onto the side
body valves.
4.
Fit the handles onto the valves and
secure by tightening the grub screws.
Push fit the caps.
5.
Remove the washers and the backnut
from the spout threaded tail. Fit the spout
to the bath ensuring that the washer is
fitted between the spout and the
bath to create a water tight seal. Secure
the spout to the bath using the washers
and metal backnut. Tighten the backnuts
onto the threaded tail. A suitable spanner
may be required to fully tighten
the backnut.
6.
Fit the diverter to the bath.
Remove the diverter handle by loosening
the grub screw. With the backnut and
rubber washer fitted to the diverter
threaded tail, push the diverter body up
through the underside of the bath. Screw
the plinth and the shroud onto the
diverter threaded tail. Fit the diverter
handle and tighten the grub screw.
Tighten the backnut underneath to secure
the diverter body in position.
Need help?
Give us a call on 0844 701 6273 and speak to one of our trained advisers.
5 Hole Bath Shower Mixer
