2
eco
ThermoSafe
3
4
1. Temperature Setting Indicator
The Digital Display a number between 01 (cool) and
12 (warm) depending upon temp dial (4) setting.
2. Push Button STOP/START Button
Press once to start the shower, press once again to
stop the shower.
Stand-By Mode
indicated by the light around the
STOP/START Button being on and “--” showing on
the Digital Display, denoting the shower is powered
and ready to start.
3. Power Control
Adjustable power settings:
Cold ( ), Medium (eco ) and High ( ).
4. Temperature Control
Adjustable temperature control.
Temperature Control Device
The Temperature Control Device will activate when
the temperature is set too high and the water inside
the water heater gets too hot. The Temperature
Control Device will switch off the power to the
heating elements. Once the unit cools down to a
safe temperature the elements will come on again
and reheat the water within the water heater and the
whole cycle will repeat itself until the temperature is
manually reduced.
Warm-Up Mode
The light around the STOP/START Button will flash
as the water heats up. Once the light stops flashing
and stays on, the shower has reached your selected
temperature and is ready to use.
Phased Shut Down & Indication
When the shower is turned off, water will continue to
flow and the light around the STOP/START Button
will flash for a short period while the heater cools
down to approximately 30’C, before automatically
turning off. This helps reduce limescale build-up.
ThermoSafe
™
Technology
ThermoSafe™ featuring thermostatic technology
which regulates the output water to minimise high/
dangerous output temperatures for a safer showering
experience.
Performance Maintenance Indication
The Digital Display (1) will indicate CL for a short
period when routine service cleaning is advised to
ensure continued showering performance.
1
5
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Product Features