9
4 .
Install the faucet
IMPORTANT:
If your sink does not have a second faucet hole, please contact a licensed professional to create
one . Do NOT attempt to drill a faucet hole yourself as this may damage the sink .
A .
Ensure that you have a faucet mounting hole in your sink or sink countertop for this faucet. If you do not, create
a mounting hole no less than 1 – 1.2 in. (26 – 30 mm).
B .
Remove the washer (1) and lock nut (2) from the faucet. Ensure that you leave the O-ring (3) on the faucet.
C .
Attach the two 2/8 in. quick connects (M) to the large faucet post (filtered water) and the short faucet post (tap
water).
3
1
2
M
M
D .
Place the faucet into the mounting hole and secure in place underneath the sink with the washer (1) and lock
nut (2).
E .
Connect two faucet tubings (K) to each of the 2/8 in. quick connects (M) underneath the sink.
M
1
2
K
K
M