12
Filter Replacement Schedule
Filter Type
Replacement Schedule
Function
PCB Composite Filter
(PAC and Carbon)
12 months
Removes mud, sand, rust, suspended
materials, residual chlorine, and
abnormal flavor from water .
RO Filter
24 months
Removes up to 99% of contaminants
including arsenic, lead, fluoride,
heavy metals and more .
Replace the Filters
When the filter indicator light on the indicator panel flashes, it indicates that one of your filters needs to be replaced .
1 .
Disconnect the water and power supply, and find the filter that needs to be replaced.
2 .
Rotate the filter rotary cover counterclockwise to remove the cover.
3 .
Take out the old filter and insert a new filter. Then replace the filter cover.
4 .
Restore power to the device and hold the Reset button for 3 seconds until the filter indicator stops flashing.
Proceed to the Flush the Filters section below.
Flushing the Filters
Press the Flush button on the panel to flush the filters . The flushing will be finished 60 seconds later . You can also
press the Flush button a second time during the 60 second flush period to stop the flushing .
NOTE:
The Flush button does not work when the device is in an automatic flushing state .