background image

3

SAFETY INFORMATION

WARNING: 

To reduce risk of injury and property damage, you must read this entire guide before 

assembling, installing and operating the dispenser .

WARNING: 

This product dispenses water at very high temperatures . Failure to use properly can 

cause personal injury . When operating this dispenser, always exercise basic safety 

precautions, including the following:

 •

Prior to use, this dispenser must be properly assembled and installed in 

accordance with this manual .

 •

For indoor use only . Keep the water dispenser in a dry place away from direct 

sunlight . Do NOT use outdoors .

 •

Install and use only on a hard, flat and level surface.

 •

Do NOT place the water dispenser in an enclosed space or cabinet .

 •

Do NOT operate the dispenser in the presence of explosive fumes .

 •

Use only properly grounded outlets .

 •

Do not use an extension cord .

 •

Always grasp the plug and pull straight out from the outlet . Never unplug by pulling 

on the power cord .

 •

Do NOT use the dispenser if the cord becomes frayed or otherwise damaged . If 

the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified persons in order to avoid a hazard.

 •

To protect against electric shock, do NOT immerse cord, plug, or any other part of 

the dispenser in water or other liquids .

 •

Ensure the water dispenser is unplugged prior to cleaning .

 •

Never allow children to dispense hot water without proper and direct supervision . 

Unplug the unit to prevent unsupervised use by children .

 •

Service should be performed only by a certified technician.

 •

The appliance must not be cleaned by a water jet and is not suitable for 

installation in an area where a water jet could be used .

WARNING: 

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear 

of obstruction .

WARNING: 

Do not use mechanical devices or other means to accelerate the defrosting process, 

other than those recommended by the manufacturer .

 •

This appliance should work under environment of temperatures from 4°C~40°C 

(39°F~104°F) and humidity ≤90%.

 •

Never turn the machine upside down or lean it more than 45° .

 •

After turning the dispenser off, allow the dispenser to sit idle for 3 minutes before 

turning on again .

Содержание CLPOU520UVF2















Отзывы: