4
4
5
8
9
10
6
7
3
Start to fit the two silver
woodscrews (f) into the holes
you have made.
Tighten each screw until its head
is 1/4" (7mm) from the surface.
Hang the ChickSafe on the two
screws.
Gently tighten each screw to
make the ChickSafe secure.
Make sure the ChickSafe remains
flat against the fixing surface.
Tie the ChickSafe cord to the
hole fitted with the grommet in
the top of the door.
Make sure the cord is taut once
tied on.
Now allow the door to hang on
the cord.
Fit the batteries into the holder.
Check the polarity of each
battery!
The battery holder fits this way
up in the top of the ChickSafe.
Fit the connector to the battery
holder.
After 10 seconds the motor will
operate briefly.
Fit the battery cover over the
top.
It pushes down into place.
Check operation carefully for
the first few days to ensure the
installation is successful and the
door is operating smoothly.
The red indicator LED provides
information on current status.
Please continue reading for
more information!
The ChickSafe is now ready!
The door will be opened or
closed according to daylight.
11
f
1/4”
(7mm)