background image

2

1020084-A

2

==================================================================================================

English Manual

INTRODUCTION AND SAFETY

CONGRATULATIONS on the purchase of your new Brinly-Hardy Aerator! Your Aerator has been designed, engineered 

and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please do not hesitate to contact our knowledgeable 

customer service department toll-free at 1-877-728-8224. We have competent, well trained technicians to help you with 

the assembly and use of your product.

  

 

    

CUSTOMER RESPONSIBILITIES

- Please read & retain this manual. The instructions will enable to assemble and maintain your product properly. 

- Please carefully read and observe the SAFETY 

SECTION of this manual.

- Follow a regular schedule in maintaining and caring for your Brinly-Hardy product.

TABLE OF CONTENTS

SAFETY   . . . . . . . . . . . . . . . . . . .  2-3

PARTS 

  . . . . . . . . . . . . . . . . . . . .  4-5

ASSEMBLY  . . . . . . . . . . . . . . . .  6-10

USE AND CARE

Specifications  . . . . . . . . . . . . . . .  11 
Installation / Removal  . . . . . . . . .  11 
Storage   . . . . . . . . . . . . . . . . . . . 12 
Use and Maintenance  . . . . . .  12-13 
Service . . . . . . . . . . . . . . . . . . . . 13

WARRANTY   . . . . . . . . . . . . . . . . . 14

REQUIRED TOOLS  

FOR ASSEMBLY

•  Flat Head Screwdriver  
•  1/2”  Wrench 
•  Set of Pliers or Hammer
•  Safety Glasses
•  Gloves

SAFETY

This symbol will help to point out  

important safety precautions throughout this 

manual. It means: 

ATTENTION! BECOME 

ALERT! YOUR SAFETY IS INVOLVED.

The machine safety labels shown in this section are placed in 

important areas on your machine to draw attention to potential 

safety hazards.
On your machine safety labels, the words 

DANGER, WARNING, 

and

 CAUTION

 are used with this safety-alert symbol. DANGER 

identifies the most serious hazards.
The operator’s manual also explains any potential safety 

hazards whenever necessary in special safety messages that 

are identified with the word, CAUTION, and the safety-alert 

symbol.

RECORD PURCHASE INFORMATION

Record your purchase information in  

the spaces provided below:

  Date of Purchase    ______________________________________

  Company Name    ______________________________________

  Company Phone    ______________________________________

 

Serial Number    ______________________________________

Содержание SA-401BH















Отзывы: