Brinly PS10-70BH Скачать руководство пользователя страница 8

==================================================================================================

English Manual

Become familiar with the operation of the spreader before you put material in the hopper. Practice walking with the 

spreader, opening and closing the rate gate at the appropriate times.

Travel at a constant  

speed and operate the 

spreader lever position. 

Remember: Open the rate gate AFTER  

the spreader is in motion at operating speed  

(about 3 mph, or at a brisk walking pace).

Close the rate gate  

while spreader is still  

at operational speed.

BEFORE PUTTING MATERIAL IN THE HOPPER

If a dial setting is not found, use the size and weight comparison 

table found in this manual. Determine a dial setting on the low 

side. If the setting proves to be too low, cover the area more 

than one time. A higher setting can be used when a proven dial 

setting is established.

Remember: Published dial settings are approximate only. 

The operation of the spreader, the condition of the material 

(damp or dry or over-pulverized) and weather conditions, are 

all contributing factors. For these reasons, it is often a good 

idea to spread the area 2 times - or one-half rate - in cross 

directions (

see information on one-half rate dial settings

). 

One-half rate dial settings are highly recommended under 

damp and humid conditions.

CONTACT OF SOME PRODUCTS ON  

SOME PLANTS CAN BE FATAL

The RATE DIAL has 9 numbers with 10 stops between each 

number.  This allows for accurate control of the spreading rate.  

The dial is set with only a turn, it will automatically lock into the 

set  position.  LINE  UP THE  DIAL  NUMBER  WITH THE  DIAL 

INDICATOR.

-  The spread width ranges from 4 - 12 ft. wide depending on 

the volume/density, particle size of the material, and rate of 

travel.

-  The spread thins or feathers at the outer edges, eliminating 

sharp, “Edge Of Spread” lines which cause stripes and 

streaks.  Extra coverage can be given under trees and other 

heavy feeding areas without showing “Edge Of Spread” 

lines.

-  Gaps and double overlaps are less likely.  Small errors in 

travel are forgiven and do not show.

WARNING:  When spreading products containing herbicides, 

exercise extreme caution with respect to careless spreading 

and to wind-drift.

 

Rate Dial

DIAL SETTING INFORMATION

USE AND CARE

8

1019008-B

Содержание PS10-70BH













Отзывы: