==================================================================================================
ASSEMBLY
Step 4
PLOW BOTTOM AND
STANDARD
Align the landside (
22
) and frog (
19
), as
illustrated here. Secure using:
- (x2) Plow bolts, 3/8" x 1" (
33
)
- (x2) Hex nuts, 3/8" (
36
)
Align the standard (
9
) with the frog (
19
)
as illustrated here. First, secure the
standard at the base using:
- (x1) Plow bolt, 1/2" x 2" (
35
)
- (x1) Hex nut, 1/2" (
38
)
Next, insert the 1/2" x 1-1/2" carriage
bolt (
32
) through frog and standard,
securing with a 1/2" hex nut (
38
).
Insert one 1/2" x 1-1/2" hex bolt / tracking
adjusting bolt (
28
) through the "tab" at the bottom
of the standard (
9
).
Place the 1/2" square nut (
41
) between the "tab" and
frog (
19
), and thread the tracking adjusting bolt (
28
)
into the square nut until tight.
Tighten all fasteners securely.
22
19
33
33
36
36
9
35
32
19
38
38
9
41
28
Side View
Tab
41
9
28
NOTE:
The Plow comes partially assembled and attached to the Frog (Part 19).
The Plow parts are not illustrated on this step for better visibility on these assembly illustrations.
10
L-1043-3-B
English Manual
