==================================================================================================
ASSEMBLY
CRANK HANDLE
Slip trunnion (
27
) through the hole
in each adjusting bracket.
Insert the crank handle (
13
) through the
hole in the side of the trunnion (
27
).
- next add a spacer (
14
), the two 5/8" jam nuts (
40
),
and then thread into the threaded tube (
11
).
NOTE:
Thread one jam nut (40) against the spacer (14) just
enough to eliminate any excessive movement of the crank against the
trunnion (27), taking care nOT to bind the crank (13).
Using two wrenches, lock the second jam nut (40) against the first.
HITCH BRACKET
Refer to this chart and measure
the distance
BET W EEN
the rear
wheels on your tractor for the
proper alignment of your bracket.
Using the alignment determined
above, align the hitch bracket (
12
)
BET W EEN
both beams (
10
)
and secure using:
- (x3) Hex bolts, 5/8" x 2" (
30
)
- (x3) Hex lock nuts, 5/8" (
3
)
Step 2
Step 3
14
11
40
13
27
Distance Between
Rear Tractor
Wheels (inches)
Use
Hole #
16" - 19"
1R
19" - 21"
2L
21" - 23"
3L
Over 23"
3L
Top View:
Assembly to
the Right
1R
Top View:
Assembly to
the Left
2L
3L
30
12
10
10
3
30
3
9
L-1043-3-B
English Manual
