7
L-1821-L
English Manual
================================================================================================
ASSEMBLY
x2
26
6
Assembly Step 1
4
6
5
24
17
4
+
5
+
6
6
+
26
2. Secure each support
from inside the cart bed (
17
)
with one 5/16 x 1 1/4" Round Head
Screw (
26
), and 5/16" Flat Washer (
6
).
From the outside, add another 5/16" Flat Washer (
6
),
one 5/16" Lock Washer (
5
) and one 5/16" Hex Nut (
4
), as
shown. Assemble finger tight until all screws are installed.
3. Do
NOT
tighten nuts (yet).
Install Supports
1. Position the Longitudinal
Supports (
24
) over the
bed, as shown.
Hardware Panel 1
Assembly Tips
BEFORE ASSEMBLY:
- It is recommended that you carefully read this owner's
manual before starting assembly of the unit.
- NOTE:
Right hand (RH) and Left hand (LH) are determined
from the Operator's position while seated on the tractor.
duRING ASSEMBLY:
-
Illustrations on page 6 are to-scale
. To confirm the identification
of any hardware during the assembly process, items can be
compared to these illustrations.
- Securely tighten all fasteners only AFTER assembly
has been completed,
unless noted otherwise.
BRINLY.COM
Additional info and videos are available
on our website, or by scanning this QR code:
6
L-1821-L
English Manual
============
============
===========
============
===========
============
============
===========
===
DO NOT RETURN PRODUCT IF
YOU ARE MISSING P
ARTS.
Please Call: 1 (877) 728-8224
HARDwARE
IDENTIFIER
Illustrations on this page
are to scale for faster
identification of hardware
during assembly
.
Hitch Pin C
otter (x1)
D-146P
. . . . . . . . . . . . . . . .
25
Hitch Pin: 1
/2" x 2 1/2" (
x1) . . . . . . . . . . . . . . . . . . . . . . . . .
13
B-3861
Retaining R
ing
3/4” (x2) . . . . . . . . . . . .
14
B-4305
Screw: Ro
und Head
5/16 x 1 1/
4”
(x12) . . . . . . . . . . . . .
20M1020P
26
Nut: Hex H
ead
5/16” (x12
) . . . . . . . . . . . . . . . .
4
30M1000P
Nut: Keps
3/8” (x2) . . . . . . . . . . . . . . . . . .
10
B-6299
Nut: Lock
5/16” (x2) . . . . . . . . . . . . . . . . .
22
B-1674P
Nut: Lock
3/8” (x1) . . . . . . . . . . . . . . . . . .
23
B-1675P
Washer: L
ock
5/16” (x12
) . . . . . . . . . . . . . . . .
5
40M1000P
Washer: F
lat
5/16” (x24)
. . . . . . . . . . . . . . .
45M1111P
6
Machine B
ushing
3/4” (x6) . . . . . . . . . .
B-5606
15
Bolt: Hex H
ead,
5/16 x 3/4” (
x2) . . . . . . . . .
2M1012P
2
Bolt: Hex H
ead
3/8 x 3 3/4
” (x1) . . . . . . . . . . . . . . . . .
3
B-6298
Wheel Spa
cer
(x2) . . . . . . . . . . . . . . . . .
B-6978-01
21
Содержание PCT-17BH
Страница 14: ...14 L 1821 L English Manual NOTES...