Brinly PCT-17BH Скачать руководство пользователя страница 16

16

L-1821-L

English Manual

================================================================================================

uSE ANd CARE

uNLOAdING CART

1. 

Park towing vehicle safely 

 

(See Towing Vehicle Manual).

2. 

Move lock bar forward to release cart box.

3.  Tilt cart bed back to unload cart.
4.  Push cart down & move cart lock bar toward cart & lock 

into place.

CAuTION: 

Avoid Injury! 

BEFORE duMPING CART:  

Park towing vehicle safely. 

Before backing up, make sure area is clear of 

bystanders, especially children. Make sure cart is 

installed to the towing vehicle. Evenly distribute 

load before releasing lock bar. 
Ensure the operator is at a safe distance when 

dumping cart! 

The Lock Bar that releases the bed 

has the potential to release quickly!

MAINTENANCE

1. 

Lubricate each wheel bearing 

with a multipurpose grease or an 

equivalent. 

2. 

Wash cart bed after each use to avoid damage 

 

to the bed or hardware.

3.  Unload cart before performing any maintenance to cart 

assembly, including changing flat tires, etc.

 

CAuTION: 

Avoid injury! 

If additional weight is required when towing a 

cart, add weight at or forward of the rear wheels. 

Adding weight behind the rear wheels can affect 

machine steering.

Cart capacity will vary with weight of towing vehicle and 

operator. Add the weight of your towing vehicle to operator 

weight to find the maximum capacity of the cart.
With all cart usage, the cart load should be reduced when 

operating on slopes or slippery surfaces to maintain stability.

EXAMPLE:  

If Towing Vehicle Weighs:  500 lbs.

 

Add Your Weight:  200 lbs.

 

Combined weight Equals:  700 lbs.

To maintain stability using the cart in this example, you cannot 

safely carry more than 700 lbs. without first adding additional 

ballast to the  towing vehicle.

The following is the maximum  

loaded cart weight:

dETERMINING WEIGHT FOR CART

CAuTION: AVOId INJuRY! 

Excessive towed 

load can cause loss of traction and loss of 

control on slopes. Stopping distance increases 

with speed and weight of towed load.
Total towed weight must not exceed combined 

weight of the towing vehicle, ballast and 

operator.

Model Cart: 

17P

Loaded Weight  

Capacity: 

850 lbs.

Содержание PCT-17BH





















Отзывы: