English Manual
7
1020313-A
5/16”-18 x 1”
Flange Head
Bolts
5/16”
Nylon Lock Nuts
7. Check the engine oil level and the function of all
controls per instructions in the
OPERATING
INSTRUCTIONS
section (pages 8-10) and the
MAINTENANCE
section (pages 11-12).
8. Calibrate spreader according to instructions in
SPREADER SETTINGS Section (pages 13-14).
IMPORTANT:
Make sure the cables are not kinked and do
not get pinched before assembly.
Assembly Instructions
WARNING:
AVOID INJURY!
WEAR SAFETY GLASSES, STURDY
GLOVES & APPROPRIATE FOOTWEAR.
Fig. 3
Operating Instructions
A. CONTROLS
1. ENGINE ON/OFF SWITCH:
The
ON/OFF
switch is located on the far left side of
the control panel. To start the engine, set the switch
to the “
ON
” Position. To turn off, throttle down the
engine, then set the switch to the “OFF” Position.
2. FUEL SHUTOFF VALVE:
The fuel shutoff valve is located between the
carburetor and the fuel tank on the LH side of the
engine. The handle turns 90 degrees to open or
close. When the handle is in the horizontal position,
it will open the flow of fuel to the engine. When it is
turned to a vertical position, it will shut off the fuel
flow to the engine. Anytime the spreader is being
trailered, or if the machine will not be in use for 30
minutes or more, close the fuel shutoff valve to
prevent flooding the engine.
ACCUWAY
®
SPREAD CALIBRATION
OFF
ADJUSTMENT
OFF
SIDE
DEFLECTOR
DOWN
UP
HOPPER
SHUT-OFF
OPEN
CLOSED
Serious bodily injury may
result from failure to follow
safe operator procedure.
•
Read the operator’s manual before
operating this machine.
•
Clear area of debris.
•
Do not remove or disable shields, guards,
or safety devices.
•
Always chock the wheel or engage the
parking brake when transporting the
machine or when parking on a grade.
•
Stop engine, disconnect spark plug, set
parking brake before adjusting or servicing.
•
Keep people and pets a safe distance away
from machine.
•
Do not add fuel while engine is warm or
running.
•
Use caution on slopes.
•
Before leaving the operator’s position, wait
for all movement to stop.
•
Do not allow operation of the machine by
untrained personel.
CAUTION
FOR FIRST-TIME OPERATORS
•
START OFF IN A FLAT, OPEN AREA.
•
KEEP BYSTANDERS AWAY
•
SET THROTTLE AT A LOW SPEED.
•
PRACTICE MANEUVERING,
(FORWARD, REVERSE, LEFT, RIGHT)
Reverse
Ground
Speed
Control
Speed
Control Lever
(Application
Transport)
Forward
Ground Speed
Control
Engine
ON/OFF
Switch
Hopper
Shut-Off
Side
Deflector
Accuway
Spread
Calibration
Fig. 4
