English Manual
6
1020313-A
3. Carefully cut the nylon straps securing the spreader
to the crate.
IMPORTANT
:
DO NOT mistakenly cut a control cable.
4. Remove the handlebar from the shipping plates
on the left and right side of the unit. Discard the
hardware.
5. Remove the shipping brackets from the unit frame.
Discard the shipping brackets and the hardware.
6. Reinstall the handlebar assembly on the spreader
with six 5/16”-18 x 1.00 hex head bolts and 5/16”
nylon lock nuts as shown in Figure 3. Hardware is
located in the manual bag.
UN-CRATE UNIT AND INSTALL HANDLEBARS
1. Read, understand and follow all safety instructions
in
SAFETY PRECAUTIONS
Section (pages 4-5).
2. Remove the top and then the side panels from the
crate.
Assembly Instructions
WARNING:
AVOID INJURY!
ALWAYS WEAR SAFETY GLASSES, STURDY GLOVES AND
APPROPRIATE FOOTWEAR WHEN SERVICING OR MAINTAINING EQUIPMENT.
Fig. 1
Remove
Fig. 2
