To Charge Spotlight:
Step 1:
Make sure the trigger switch is not locked ON.
Step 2:
Plug the AC charger directly into bottom of spotlight handle.
Note:
L.E.D. Indicator light will turn on when battery
is charging.
Always Allow Battery to Fully Charge
Step 3:
For AC Charger -
L.E.D. indicator will automatically turn off
when battery is fully charged. Do not charge longer than
24 hours.
To Prevent Damage to Spotlight and Battery:
•
Battery is ready to use when purchased - DO NOT recharge before
first use.
•
Do not attempt to use spotlight while charging. Doing so may cause
damage to battery and chargers.
•
Only use charging devices that are provided with the Q-Beam LED
Rechargeable Spotlight or its replacements.
•
Do not allow battery to completely discharge. A dim light indicates a
low battery. Recharge battery as soon as possible after each use.
•
Always keep the battery fully charged when not in use.
•
For best results, fully charge battery after each use. This will prolong
the overall life of the battery.
•
Dry location use only
WARNING:
A damaged battery can leak acid. Avoid contact with eyes and
skin. If contact occurs, flush immediately with large amounts
of water. DO NOT ingest. If contact with eyes or ingestion
occurs consult physician immediately.
3
To Charge
IMPORTANT:
Charge battery before storing for extended periods.
Battery will keep its charge. A completely discharged
battery may not recharge properly.
L.E.D. Indicator Light
Contains alkaline batteries.
Batteries must be recycled or
disposed of properly.
INS_800-5000-0.qxd 9/9/09 11:45 AM Page 4
