Larson Electronics, LLC
. (
RCL700
rev 0
7
-
27
-201
8
)
Troubleshoo
ting
If your
RCL700
stops opera
ti
ng, please check for the following condi
ti
ons:
1.
Check the ba
tt
eries in the wireless remote.
2.
The inrush current for an incandescent lamp is typically ten to
fift
een
ti
mes the opera
ti
ng
current and an HID switching power supply inrush current can be even greater. This high
inrush current can cause a severe voltage drop if the power feed wires are long, under size or
the power supply is weak. This may cause the receiver circuit to enter a low voltage shutdown
state. It is recommended to only turn on the lights while the vehicle is running. The power to
the
RCL700
needs to be cycled o
ff
and back on to reset the shutdown circuit.
3.
The motor control circuit is overcurrent and over temperature protected in the event the light
is jammed against an imovable object. The power to the
RCL700
will need to be cycled o
ff
and back on to reset the overcurrent/over temperature circuit.
Remote Control Spotlight
Instruc
ti
ons and Operator’s Manual
Contact
Larson Electronics
For ques
tio
ns, sales or service please contact:
Phone:
800-369-6671
Fax:
903-498-3364
Email:
Web:
sales@
larsonelectronics.com
www.
larsonelectronics
.com
Address:
Larson Electronics, LLC.
9419 US-HWY 175
Kemp
,
Texas
75143
USA
