21
http://www.brilnurse.com
Adjust Channel Intensity for channel B, use output(s) B:
1.Press the channel switch button once, to switch to channel B.
The B letter will blink to indicate channel B is working.
2.To select the mode, touch any of the TENS modes or EMS
modes displayed on the screen. The selected mode will blink.
3.Press intensity “+” or “-” button to increase/decrease the
intensity. When changing the mode, the intensity level will
automatically reset zero.
4.Keep increasing the intensity by pressing the intensity
increase button to get to the desired level.
CAUTION:
1. We recommend starting at the lowest level of intensity and
gradually increase to a level that is comfortable.
2. The intensity should be set at a level where you will
experience some muscular vibration and involuntary muscle
movements.
3. If the stimulation levels become uncomfortable, reduce the
stimulation intensity to a comfortable level or turn it off directly.
Step 6: Adjust timer
The timer will increase in the increment of 10. Adjust timer from
10 minutes up to 90. Keep pressing the T button to set to 90
minutes.
Step 7: Pause
Long Press the A/B/Pause button to pause or resume during the
device working.
Adjust Channel Intensity for channel A, use output(s) A:
1.To select the mode, touch any of the TENS modes or EMS modes
displayed on the screen. The selected mode will blink.
2.Press intensity “+” button to increase the intensity. When changing
the mode, the intensity level will automatically reset zero.
3.Keep increasing the intensity by pressing the intensity increase
button to get to the desired level.