100ft. LED Rope Light
Use and Care Guide
MOUNTING THE ROPE LIGHTS
Item # 9000-0011
Model # AL05-100FT-WW-1.5-B
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
100ft. Rope Light
w/5ft. Power Cord x 1
B - Mounting Clip x 50
C - Screw x 50
A -
Make sure the distance between two lines of rope light is at least 1/2 in. (12 mm).
Mounting clips should be evenly spaced and be a maximum of 3 ft. (0.91 m) apart.
Insert the screw (C) through the opening in the mounting clip (B).
Screw the mounting clip (B) into position at the installation location.
Place the rope light (A) securely into the mounting clip (B).
WARNING:
When using this product outdoors,
basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and
personal injury.
WARNING:
Do not cover this product as the
covering may cause the flexible light to overheat
and either melt or ignite.
WARNING:
This product has a polarized plug (one
blade is wider than the other) as a feature to reduce
the risk of electrick shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted.
Do not alter the plug.
Ground Fault Circuit Interrupter (GFCI) protection should be provided in the circuits
or outlet to be used for outdoor use. Receptacles are available that have built-in GFCI
protection.
Only use outdoor extension cords such as type SW, SOW, STW, STOW, SJW, SJOW, SJTW,
or SJTOW. This designation is marked on the wire of the extension cord.
The rated voltage for this product is 120VAC, 60Hz, 60W, 0.5A.
Do not operate this product with the flexible light tightly coiled.
Do not route the cord or flexible light cable through walls, doors, windows, or any
similar part of a building structure.
Do not subject flexible lighting to continous flexing.
Do not exceed the maximum extension length in feet permitted by the marking. The
maximum extension length for this rope light is 100ft. (30.48 m).
WARNING:
Do not install the rope light within
1 ft. (4.87 m) of pool or spa. Do not install rope
lighting in cabinets, tanks, or enclosures of any kind.
WARNING:
Do not puncture, cut, shorten, or
splice the flexible lighting.
WARNING:
Do not use if there is any damage to
the light or cord insulation. Inspect periodically.
CAUTION:
All units must be unplugged before
you add additional segments. Only use segments
recommended by the manufacturer of this lighting
system.
CAUTION:
Ensure all connections and the end
cap on the last segment are tightly secured to
prevent the entry of water.
WARNING:
Secure this flexible light using only the
hangars or clips provided. Do not secure this product
or its cord with staples, nails, or like means that may
damage the insulation or permanently attach to the
building structure.
WARNING:
Do not submerge the flexible light in
liquids or use the product in the vicinity of standing
water or other liquids.
WARNING:
Do not mount or secure the rope
light in a manner than can cut the outer jacket or
damage the cord insulation. Inspect the rope light
carefully before use and discard any rope lights
that have a broken outer jacket, loose connections,
or frayed wire insulation.
PAGE1
S
AFETY
I
NFORMATION
I
NSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
Phillips Screwdriver
Please contact us at 1-844-255-9692 for further assistance.
Brightlux is a trademark of American Ligthing, Inc.
© 2021 All Rights Reserved.
