4
8. High security performance
The image processor has no operating system, the virus can not be infected; full parallel work, no
system overall crash risk; system data has been solidified before leaving the factory, can not be
changed, unexpected power failure will not cause data loss, the processor can withstand frequent
switching. The security and stability of the industrial computer card splicer depends on the
installed software operating system.
Ⅲ
. Installation Instruction
3.1 Unpacking the Machine
Check the host and accessories. Including host, power cord, network cable\serial cable, manual.
Video wall
processor
Software disc
Cable
User Manual
Power cable
3.2 Installation of the Machine
Insert the power cable into the power connector on the rear of the chassis and follow the logo
on the rear of the machine to access the signal. The connected output device is accurately
connected according to the output identifier, and the numbering sequence is from left to right,
from top to bottom.
3.3 Machine Debugging
Turn on the power switch, start the device, and debug it using network or serial port control.
3.4 Installation of the software
The minimum computer configuration requirements are as follows
：
Standard PC, CPU min. Pentium IV
Min. 50GB free hard disk space
Min. 2GB RAM
Microsoft® Windows XP SP3 or higher
