Bright Solutions BSL1610SE, Руководство пользователя, Страница: 5 / 21

”
SLIDER EXTRACTOR SETUP
!!! Read operators manual
thoroughly prior to operating or
servicing this machine!!!
Carefully check the shipping carton
for signs of damage. Report any
carton damage to carrier
immediately.
Check carton contents to ensure
carton is complete. Contact your
Viper distributor if anything is
missing.
Contents:
•
Carpet Extractor
•
Short
“
bleeder
”
vacuum
hose
•
50
’
extension power cable
!!! Read operators manual
thoroughly prior to operating
or servicing this machine!!!
1) Using a hose or bucket, fill tank
with a maximum of 10 gallons of
hot water.
2)
Add distributor recommended
cleaning solution
!!! Do not use flammable
liquids or operate machine in
or near flammable liquids or
vapors!!!
3) Connect the supplied extension
power cable to the machine. Plug
cord into a grounded wall outlet.
(see grounding instructions)
4) Drop the brush head to the floor
with the foot release pedal on
the back of the machine.
5
MACHINE OPERATION
PRIOR TO EXTRACTING CARPETS
1) Inspect power cable and
extension cable for damage.
Replace cable if damage is found.
2) Vacuum carpet to remove debris
prior to extracting carpet.
CARPET EXTRACTING
1) Turn on vacuum / pump switch.
NOTE: Solution will only spray
when the brush / spray button is
pushed.
2) To start cleaning, push the brush /
spray button and begin to pull
the machine backwards.
NOTE: For best cleaning results,
pull back on the machine at a
pace of approx. 10 feet in 15
seconds.
3) Release brush / spray button at
the end of the path, and continue
to pull machine back for another
12 inches to pick up excess
solution.
4) Tip machine back onto the
transport wheels and push
forward to begin next path.
OPERATING HINTS
1) Overlap cleaning path by approx.
2 inches
2) Work away from power outlet
and power cable in order to avoid
damage to the power cable.