Bright Solutions BSL1610SE, Руководство пользователя

Страница: 4 / 21

”
SAFETY PRECAUTIONS
GROUNDING INSTRUCTIONS
General
–
This carped extraction
machine shall be grounded while in
use to protect the operator from
electric shock. The machine is
provided with a three-contact
grounding type attachment plug to
fit the proper grounding type
receptacle. The green (or green &
yellow) conductor in the cord is the
grounding wire. Never connect this
wire to other than the grounding
pin of the attachment plug.
This machine is for use on a nominal
120-volt circuit and has a grounding
plug that resembles the plug
illustrated in figure below. Make
sure that the machine is connected
to an outlet having the same
configuration as the plug. No
adapter should be used with this
machine.
This machine is intended for
commercial use. It is constructed for
use in an indoor environment and is
not intended for any other use. Use
only recommended accessories.
All operators shall read, understand
and exercise the following safety
precautions:
1) Do not operate machine:
- Unless trained and authorized
- Unless you have read and
4
understand operators manual
- In flammable or explosive areas.
- With damaged or modified
cord or plug.
- If not in proper operating
condition.
- In outdoor areas.
- In standing water.
- Without filters in place.
- With the use of unapproved
extension cords.
2) Before operating machine:
- Make sure all safety devices are
in place and operate properly.
3) When using machine:
- Mix and handle any chemicals
according to manufacturer
’
s
recommendations
- Do not run machine over cord.
- Do not pull machine by cord or
plug.
- Do not pull cord around sharp
edges or corners.
- Do not unplug by pulling on
the cord.
- Do not stretch cord.
- Do not handle plug with wet
hands.
- Keep cord away from heated
surfaces.
- Do not pick up flammable
materials or reactive metals.
- Report machine damage or
faulty operation immediately.
4) Before leaving or servicing
machine:
- Turn off machine.
- Unplug power cord from outlet.
5) When servicing machine:
- Unplug cord from outlet.
- Use manufacturer supplied or
approved replacement parts.
- Avoid moving parts. Don
’
t wear
loose clothing.