Bright Solutions BSL1500, Руководство пользователя

Страница: 5 / 11

Handle Release Assembly Instructions
-5-
Handle Release Assembly Instructions
when you are standing behind it.
2) Assemble hardware in the following order spacer, letf handle
1) Make sure actual cord wrap faces to the left of the machine
bracket, nylock nut. (do not over tighten nylock nut, Only
tighten it enough to hold handle in place when compression
lever is in down position)
ard so they lean against the rear wheel.
2) Push the two handle brackets backw-
1) Remove nut and spacer from handle
bracket assembly.
1) Connect power cords together.
STEP 1
STEP 4
STEP 3
handle clamp blocks
1) Remove handle clamp
base with hex head
3) Re-attach the blocks to the
2) Place handle assembly into
blocks with hex head
5mm
5mm
STEP 2
.