BRIGHT Coop Cage Unloading System, Руководство оператора и по техническому обслуживанию, Страница: 41 / 76

Maintenance
Cage Unloading System
41
MAINTENANCE, UNLOADING SYSTEM (CONT’D)
MAKE ABSOLUTELY SURE THAT NOBODY IS ON AND/OR UNDER
THE UNLOADING SYSTEM. ALSO MAKE SURE NOBODY IS INSIDE
THE SAFETY FENCE AND ALL SAFETY GATES ARE CLOSED BE-
FORE ENERGIZING THE UNLOADING SYSTEM.
DANGER
To lock the cradle do the following steps:
•
Open the access doors at the end of the cradle lower arms
•
Turn the lock handles up.
•
Insert the lock pins into the cradle arm ends.
•
Close the access doors in order to secure the locks in place.
ALWAYS UNLOCK THE CRADLE BEFORE RUNNING THE UNLOAD-
ING SYSTEM FOR TEST, AFTER ANY MAINTENANCE OR REPAIRS.
IF THE LOCK REMAINS IN THE LOCK POSITION, AND THE DUMP-
ER TILT LEVER IS ACTIVATED, THE CRADLE WILL BE DAMAGED.
UNLESS YOU HAVE AN INTERLOCK SYSTEM THAT SHUTS THE HY-
DRAULIC PRESSURE OFF AT THE 5 SECTION VALVE.
GENERAL
•
Pressure wash the entire unloading system daily. When pressure washing the entire unloading system, be on
alert to detect any discrepancies while washing the system. If any discrepancies are found, take note in order
to make the repair after the washing process is completed.
•
Grease all bearings and bushings weekly.
•
Lubricate all drive chains weekly.
SAFETY DEVICES
Verify that all safety devices are working properly every week. We recommend using the following steps to ensure that
they are working properly.