12
13
Hose to Pump (PIC. 5)
1. Attach the high pressure hose to the pump. Pull back
collar and push male connector in fully. Release collar.
Ensure that the hose does not touch the muffler or goes
over the top of the fuel tank.
2. Have hose lay to the back of the pump and curve to the
hose hanger.
Note: Do not allow high pressure hose to touch the muffler.
Damage will occur and will not be covered by warranty.
To remove hose, pull collar back, pull out hose,
release collar.
PIC. 5
PIC. 6
Pressure Hose to Gun Connection
Attach the high pressure hose to gun. Pull back collar and
push male connector in fully. Release collar.
To remove hose, pull collar back, pull out hose,
release collar.
Gun Safety Lock (PIC. 6)
To stop accidental use of the trigger, the gun is fitted
with a safety lock.
To lock; push lever up.
To unlock; push lever down.
Garden Connection (PIC. 7)
Screw black garden hose connection to pump.
Dump Tube (PIC. 7)
During times of no water flowing whilst motor is running,
the pump will heat up. Periodically the pump will dump hot
water through the tube to cool down.
UP (LOCK)
DOWN
(UNLOCK)
PIC. 7
HOSE CONNECTION
Garden fitting not shown
