10
11
UNPACKING & ASSEMBLY
Unpacking
Note: Carefully unpack your pressure washer. This pressure
washer is bulky and heavy, two (2) person lift required.
Dispose of all packing material in an environmentally
responsible manner.
Open carton, gently lift the pressure washer clear of the
carton and packaging, this may require 2 people. Remove
from plastic bag.
Note: Plastic bags can be a danger to young children,
dispose of immediately. Always dispose of packaging in a
responsible manner.
Wheels (PIC. 2)
1. Place wheel on axle.
2. Slide the axle into the tube under the frame. Depress
the brass button and push the axle into the tube.
3. Rotate the axle until the button “clicks” and locks
into the hole in the tube.
Handle (PIC. 3)
1. Align top handle to the main frame.
2. Insert bolt and tighten hand wheel.
Hose, Gun & Lance Holders (PIC. 3)
1. Align each holder(s) holes with those on handle.
2. Insert bolt and tighten.
Gun/Lance (PIC. 4)
Push the lance into the gun and tighten nut. Slide cover
over the nut.
PIC. 4
Brass Button
Push Brass button in and ensure
that the Brass button locates into
the hole in the tube
PIC. 2
Gun
Lance
PIC. 3
Top Handle
Trigger
Holder
Hose Holder
