TROUBLESHOOTING
20
TROUBLESHOOTING
Problem
Cause
Correction
No AC output is available, but
generator is running.
1.
One of the circuit breakers is
open.
2.
Fault in generator.
3.
Poor connection or defective cord
set.
4.
Connected device is bad.
1.
Reset circuit breaker.
2.
Contact Authorized service facility.
3.
Check and repair.
4.
Connect another device that is in
good condition.
Generator runs good at no-load
but "bogs" down" when loads are
connected.
1.
Short circuit in a connected load.
2.
Generator is overloaded.
3.
Shorted generator circuit.
1.
Disconnect shorted electrical load.
2.
See "Don't Overload Generator".
3.
Contact Authorized service facility.
Generator will not start; or starts
and runs rough.
1.
Fuel Valve is in the "Off" position.
2.
Failed battery.
1.
Turn fuel valve to the "On"
position.
2.
Replace battery.
Generator shuts down during
operation.
Out of fuel.
Fill fuel tank.
Generator lacks power.
Load is too high.
See "Don't Overload Generator".
Содержание Elite 09801-9
Страница 59: ...NOTAS 59 NOTAS...
